Artificial Grass Seaming

Seam Tool

Also known as the “Super Seamer,” our ‘S’ shaped seaming tool creates a smooth surface that is easy to seam together. The ‘S’ shaped seaming tool creates a smooth surface that is easy to seam together. It alleviates the common artificial turf “mohawk effect,” In four easy steps, synthetic turf can be seamed together flawlessly when using this tool.

This design allows the seam to stay invisible for years and prevents the sand from separating the seam.

Seam Tape

Featured as a double-sided non-adhesive, our seam tape is 12 inches wide and works great for any synthetic turf seaming process. Seaming tape is available at any custom length with a maximum length of 328 feet per roll. This can also apply this tape in conjunction with turf adhesive. The adhesive should be applied to the dull side of the tape.

The adhesive design is engineered for sealing the seams in putting greens and over-concrete artificial grass installations.

Maintaining Your Artificial Turf Landscape is Simple

Artificial grass is low-maintenance, not no-maintenance. You will need to complete a few easy maintenance tasks to keep it looking its best:

• Rinse It: Airborne dust and dirt can settle on your artificial grass and make it look dingy. Fortunately, cleaning it off is as simple as rinsing with water.
• Brush It: Heavy foot traffic can cause artificial grass to look flat and matted. To prevent or correct this, brush it against the direction of the blades with a plastic-bristled brush. That will get the edges standing up perkily again.

Power Brooming:

When synthetic turf fibers are not brushed vertically, they create a shiny appearance. This is due to the reflection of light. Defibrillation diminishes this shiny look by placing the fibers in an upright position and reducing the glare from the sun.  When done correctly, defibrillation creates a much darker and plusher appearance.

• Alternatively can do it mechanically with a motorized broom. Or with a rake and/or push broom.